Hobbywing Motors, Propellers and ESC Systems for Agriculture Drones in India
Bharat Skytech supplies genuine Hobbywing motors and propellers for agriculture and industrial drones across India. Hobbywing is one of the most widely used propulsion brands in the Indian agriculture drone industry, and its XRotor motors are widely used in spraying drones. We supply Hobbywing motors, propellers, hubs and spare parts for 10L, 16L, 20L and 25L+ spraying drones, including the X6 Plus, X8, X9 Plus, X11 Plus and X13 series.
If you operate, assemble or service spraying drones, there is a strong chance the motors turning your propellers carry the XRotor name. Bharat Skytech provides genuine Hobbywing products with GST billing and after-sales support for agriculture and industrial UAV applications across India.
This page covers what Hobbywing makes, which propulsion system suits different payload classes, and how to buy genuine Hobbywing products in India.
Hobbywing Motors and Propellers Available in India
Hobbywing X9 G2L Motor with 3611 Propeller Combo
Hobbywing X9 Plus G2L Motor with 4314 Propeller Combo
Hobbywing X6 Plus G2 Motor with 2480 Propeller Combo
Hobbywing X13 Motor (18S) with 5620 Propeller Combo
Hobbywing X8 G2 Motor with 30x11S Folding Propeller
Aerosol Nozzle Max – Model 8820 For Agriculture Drones by Bharat Skytech
Folding Aerosol Nozzle – Model 4820 For Agriculture Drones by Bharat Skytech
Folding Aerosol Nozzle Pro – Model 5820 For Agriculture Drones by Bharat Skytech
Aerosol Nozzle – Model 4810 For Agriculture Drones by Bharat Skytech
About Hobbywing
Hobbywing Technology is a Chinese manufacturer of brushless electronic speed controllers and motors, with product lines covering RC cars, model aircraft, boats and unmanned aerial systems. In the UAV space, the company is best known for its XRotor series – integrated propulsion systems built specifically for multirotor platforms.
The design idea behind the XRotor agriculture range is integration. Instead of wiring a separate ESC to each motor, Hobbywing packages the motor and a FOC (Field-Oriented Control) ESC into a single sealed unit. Field-oriented control regulates the current vector supplied to the motor windings, which gives smoother torque delivery, better efficiency at partial throttle and lower heat generation than conventional square-wave ESC control. For a spraying drone that spends hours at high sustained load in 40°C field conditions, that thermal margin matters.
The practical result for an Indian operator is fewer wiring joints, less weight, fewer failure points and a propulsion unit that is sealed against rain, dust, salt spray and agrochemicals. Hobbywing publishes IP ratings for its agriculture propulsion units – IPX7 on the X6 Plus and IPX6 on the X9 Plus – which is the reason these systems are the default choice on so many plant-protection platforms.
The Hobbywing XRotor agriculture range
- X6 Plus — entry-level plant protection propulsion. Around 3–5 kg load per axis, matched with 2480 propellers on 28/30 mm carbon fibre arm tubes. Suited to compact spraying and spreading drones and to trainer or demo platforms.
- X8 — the workhorse of the 10L–12L class. Roughly 5–7 kg per rotor, matched with 3090 or 3011 folding propellers.
- X9 Plus — medium-heavy propulsion for 10L to 16L spraying drones. Uses 3411, 3611 or 36190 folding propellers depending on the variant, with an integrated FOC ESC and CAN telemetry back to the flight controller.
- X11 Plus — heavy-lift propulsion for 20L+ platforms, matched with 4314 carbon-plastic folding propellers and 12S–14S battery systems.
- X13 — the top of the agriculture line, running on 18S supply with 5620 propellers for 25L and larger drones.
Alongside the motors, Hobbywing manufactures matched carbon fibre folding propellers with hubs, brushless water pumps for spraying systems, and accessories such as the DATALINK box used for firmware updates and diagnostics.
Applications and Use Cases
Agriculture spraying drones. The largest use case in India. Hobbywing propulsion powers the majority of plant-protection platforms in the 10L to 25L tank range, where the motor must hold stable thrust through a full-to-empty tank cycle and tolerate pesticide mist, dust and humidity.
Fertiliser and seed spreading. Spreading drones carry dense granular payloads and see high current draw on take-off. Integrated FOC ESCs with over-current and stall protection are well suited to this duty cycle.
Drone frame assembly and OEM builds. System integrators building on EFT and similar frame platforms use Hobbywing propulsion because the arm tube diameters, mounting patterns and CAN protocol integration are already matched to common flight controllers.
Survey, mapping and inspection UAVs. Heavy-lift multirotors carrying LiDAR, multispectral or high-resolution camera payloads use the same propulsion classes, where efficiency directly translates into endurance.
Industrial and logistics multirotors. Payload delivery and utility inspection platforms use the X9 Plus, X11 Plus and X13 classes for their thrust margin and sealed construction.
Fleet maintenance and repair. Operators running multiple drones need identical replacement motors and propellers on hand. Propulsion units and propellers are consumable items in commercial spraying work, and downtime during the spraying season is expensive.
Why Buy Hobbywing from Bharat Skytech
We are a Hobbywing distributor focused on agriculture and industrial UAVs, not general RC. Our stock is selected around what Indian spraying drones actually need – the XRotor propulsion range and the matched propellers – not a catalogue spread thin across RC cars and boats.
Genuine product supply. Counterfeit and grey-market propulsion parts are a real problem in the Indian drone parts market. A copied motor may look identical and fail under sustained load, taking an arm or a full airframe with it. We supply Hobbywing products through our regular sourcing channels with proper invoicing.
Correct CW and CCW pairing. We stock both rotation directions for every motor and propeller line we carry, so you can order a matched set for a four-, six- or eight-rotor frame rather than discovering a mismatch during assembly.
Full propulsion-system supply from one supplier. Bharat Skytech also stocks EFT drone frames, JIYI flight controllers, Skydroid and Make in India B12 Bharat Agriculture Drone Remote Controller, Evercell Make in India batteries and chargers, and spraying components. You can source a complete power and control system without coordinating four different vendors.
Technical support from people who build these systems. Our team can advise on motor-to-payload sizing, propeller selection, ESC current headroom and battery voltage matching. If you tell us your frame, tank size and all-up weight, we can tell you which propulsion class fits.
GST invoicing and business supply. We are a B2B e-commerce business backed by Thakral Corporation, supplying drone assemblers, service providers, FPO-level operators and institutions with proper tax invoices and bulk pricing on volume orders.
Pan-India dispatch. Shipping across India, including to agricultural districts where drone service operators are based.
How to Choose the Right Hobbywing Product
Step 1 — Start from your all-up weight, not your tank size. Take-off weight is what the motors actually lift: frame, battery, tank, pump, spray system and a full payload. Divide by the number of rotors to get load per rotor, then choose a motor whose recommended operating load sits above that figure with margin left. A motor running at its ceiling on every flight will run hot and fail early.
Step 2 — Match the motor to the payload class.
- Compact spraying and spreading platforms → X6 Plus with 2480 propellers
- 10L to 12L spraying drones → X8 with 3090 or 3011 propellers
- 10L to 16L spraying drones → X9 / X9 Plus with 3411, 3611 or 36190 propellers
- 20L+ heavy-lift platforms → X11 Plus with 4314 propellers
- 25L+ platforms → X13 on 18S with 5620 propellers
Undersizing the motor for the payload class is the single most common mistake we see in Indian builds.
Step 3 — Check arm tube diameter and mounting pattern. The motor mount must match your frame’s carbon fibre tube diameter. The X6 Plus is designed around 28/30 mm tubes; larger systems use correspondingly larger tube sizes. Tube diameter converters are available for some combinations, but it is better to match at the design stage.
Step 4 — Confirm your battery voltage. Each propulsion class has a supported cell count and a maximum input voltage. Running a 14S-rated system on 18S will destroy the ESC. Confirm the cell count of your battery pack against the motor specification before ordering.
Step 5 — Order CW and CCW in the correct ratio. A quadcopter needs two clockwise and two counter-clockwise units. A hexacopter needs three of each. Propellers are also direction-specific and are not interchangeable between arms.
Step 6 — Decide between motor-only and motor-plus-propeller combo. If you are building a new drone, order the combo so the propeller is matched and balanced to the motor. If you are replacing a failed unit on an existing airframe, a motor-only order is usually more economical, since your existing propellers are still serviceable.
Step 7 — Size your ESC headroom if you are not using integrated units. For builds using separate ESCs, size for sustained current at full-tank take-off, not for the average cruise figure, and leave thermal margin for Indian summer field conditions.
If you are unsure at any of these steps, send us your frame model, tank capacity and all-up weight and our team will confirm the right configuration before you order.
Frequently Asked Questions
Is Bharat Skytech a Hobbywing distributor in India?
Yes. Bharat Skytech supplies Hobbywing motors and propellers across India, focused on the XRotor agriculture and industrial UAV propulsion range. We stock the X6 Plus, X8, X9 Plus, X11 Plus and X13 series along with matched carbon fibre propellers and spare parts, and we supply with GST invoicing.
Which Hobbywing motor should I use for a 10L agriculture drone?
For a 10L to 12L spraying drone, the X8 with 3090 or 3011 propellers is the common choice. Many operators also run the X9 Plus on 10L platforms for the additional thrust margin and better efficiency at partial throttle. The correct answer depends on your all-up weight and rotor count, so share your frame details with us and we will confirm.
What is the difference between the Hobbywing X6 and X6 Plus?
The X6 Plus is the updated version of the X6 platform, built around an optimised FOC ESC and motor algorithm with an IPX7 waterproof and dustproof rating. It carries approximately 3–5 kg per axis and matches 28/30 mm carbon fibre arm tubes with 2480 propellers.
Do Hobbywing XRotor agriculture motors include an ESC?
Yes. The XRotor agriculture propulsion units are integrated systems with the FOC ESC built into the motor assembly. This reduces wiring, cuts weight and removes several failure points compared with a separate motor-and-ESC arrangement. It also means you do not buy a Hobbywing ESC separately for these systems.
What is the price of a Hobbywing X6 motor in India?
Pricing depends on the exact variant, on whether you are ordering motor-only or a motor-plus-propeller combo, and on order quantity. Current pricing for each SKU is listed on the individual product pages. For bulk and dealer quantities, contact us for a quotation.
What is the difference between CW and CCW Hobbywing motors?
CW is clockwise rotation and CCW is counter-clockwise. A multirotor needs both in equal numbers so the rotational torques cancel out and the aircraft holds heading. Propellers are direction-specific in the same way. Fitting the wrong rotation on an arm will make the drone uncontrollable, so always order matched sets.
How do I know my Hobbywing motor is genuine?
Buy from a supplier who invoices the sale and stands behind it. Genuine units carry consistent labelling, correct model markings and matched packaging, and they perform to their published thrust figures under load. If a price looks far below market, treat it as a warning sign. Bharat Skytech supplies through our regular sourcing channels with proper documentation.
Can I use Hobbywing motors on an EFT drone frame?
Yes. EFT frames are widely used in India with Hobbywing propulsion, and the arm tube diameters and mounting patterns of the common EFT E-series frames are matched to XRotor units. We stock both, so we can confirm the pairing before you order.
Do you supply Hobbywing propellers separately from the motors?
Yes. We stock Hobbywing carbon fibre folding propellers with hubs in both CW and CCW, including 3411 and other sizes matched to the XRotor range. Propellers are consumable items on spraying drones, and most fleet operators keep spares in stock.
Do you ship Hobbywing products across India?
Yes. We dispatch across India, including to agricultural districts where drone spraying operators are based. Bulk orders for assemblers and institutions can be arranged with dedicated pricing.
Buy Genuine Hobbywing Products in India
Whether you are building a new spraying drone, expanding a fleet or replacing a failed motor mid-season, Bharat Skytech supplies the Hobbywing XRotor propulsion range with proper documentation, GST invoicing and technical support behind it.
Browse the full Hobbywing range, or send us your frame model, tank capacity and all-up weight and our team will recommend the correct motor and propeller configuration before you place the order.
Shop Hobbywing Motors and Propellers | Request a Bulk Quotation | Talk to Our Technical Team