2000 W fast charge
Serious output pushes high-capacity packs back to field-ready in minutes, not hours — so spray runs and sorties never wait on the charger.
LiPo / LiHV Intelligent Charger
Drone Battery Charger - Evercell EC2000 - 14S
DUAL CHANNELS LIPO/LIHV INTELLIGENT CHARGE
BIS-approved,the Evercell Charger supports 6–14S LiPo/LiHV batteries, features adjustable 5A–30A charging,and comes with a 3.2” color LCD display for efficient battery management
2000W Output
5–30A Adjustable
≤14S LiPo/LiHV
>91% Efficiency
AC 100–240V
EC2000-14S · 265 × 200 × 140 mm · 4.6 kg
Performance
Engineered for heavy-duty drone operations
Every figure on the EC2000-14S exists to keep birds in the air. This is a fast drone charger built around fleet uptime, not bench testing.
5–30 A adjustable
Dial in the exact current for any pack. Push hard for a fast turnaround or charge gently to protect cells — full control, every cycle.
Up to 14S LiPo / LiHV
A true 14S LiPo charger spanning 22.2 V to 62.3 V — the cell counts that heavy-lift and agriculture platforms actually run.
>91% efficiency
More energy into the pack, less lost as heat. Efficient conversion means cooler, longer field sessions on the same generator.
Wide AC input
Runs on AC 100–240 V, 50–60 Hz — plug into field generators, depots or grid power anywhere on site, no adapter juggling.
Charge · Storage · Hub
Smart modes with over-voltage and reverse-polarity protection safeguard every pack between missions and through the off-season.
Built For
One charger, every drone mission
From spray fleets at dawn to industrial survey drones flying back-to-back, the EC2000-14S is the drone charging solution India's operators rely on.
Fleet deployment · Charge / Storage / Hub modes
Agriculture drones
Keep spray runs moving. As an agriculture drone charger it lets crews swap, charge and relaunch without stalling the route.
Industrial UAVs
An industrial UAV charger ready for mapping, inspection and survey fleets flying sortie after sortie.
Heavy-payload systems
Headroom for the largest packs on heavy-lift, logistics and delivery platforms — charged at full power.
Specifications
EC2000-14S full specifications
The complete technical readout for the LiPo charger for drones that field teams trust.
Datasheet — EC2000-14SLiPo / LiHV · Up to 14S · 2000 W
Product Information
- Model
- EC2000-14S
- Battery Type
- LiPo / LiHV
- Voltage Range
- 22.2 – 62.3 V
- Current Range
- 5 – 30 A (Adj.)
- Max Power
- 2000 W
- Ambient Temp.
- 40 °C
Input
- Input Voltage
- 100 – 240 VAC
- Input Power
- 2000 W
- Frequency
- 50 – 60 Hz
- Efficiency
- > 91%
Output
- Max Cut-off
- 62.3 V
- Cells
- 14S
- Max Power
- 2000 W
- Modes
- Charge / Storage / Hub
- Connector
- AS150U-M
Protection
- Over Voltage
- Yes
- Reverse Polarity
- Yes
Mechanical
- Dimensions
- 265 × 200 × 140 mm
- Weight
- 4.6 kg
Application
- Smart Battery
- Yes
- Soft Battery
- Yes
Why Evercell
Why operators choose us
Less downtime
High-output, adjustable charging keeps more drones in the air and fewer waiting on the ground.
Field-proven
Designed for dust, generators and long shifts — a charger built for the field, not the lab bench.
Backed in India
Local stock, support and a growing dealer network make this a dependable drone charging solution India can service fast.
Introduction
Drone Battery Charger — Evercell EC2000-14S | 14S LiPo/LiHV, 2000W
The Evercell EC2000-14S drone battery charger is a dual-channel LiPo/LiHV intelligent charger built for the way Indian agriculture and heavy-lift drone fleets actually work. With 2000 W of adjustable output, 6–14S support across 22.2–62.3 V, and 5–30 A of fully controllable current, it brings high-capacity packs back to field-ready in minutes — not hours. BIS-approved and Made in India by Bharat Skytech, it is the professional drone battery charger operators standardise on when uptime is revenue.
Request a bulk quote for current drone battery charger price in India.
Built for Agriculture & Heavy-Lift Drone Operations
When a spray fleet is mid-route at sunrise, the charger is the quiet bottleneck that decides whether the next sortie launches on time. The EC2000-14S was engineered around that single truth. As an agriculture drone battery charger, it lets crews swap, charge and relaunch without stalling the route. As an industrial drone battery charger and UAV battery charger, it keeps mapping, inspection and survey fleets flying sortie after sortie. This is a drone battery charging solution designed for fleet uptime, not bench testing — a true drone battery management charger for serious operations.
2000W Fast Charging for Field Turnaround
Raw output turns a charger from a bench tool into a field asset. As a fast charging drone battery charger, the EC2000-14S delivers up to 2000 W, enough to push high-capacity agriculture packs back to flight readiness quickly so spray runs and sorties never wait on the charger.
5–30A Adjustable Current Control
Current adjusts from 5 A to 30 A. Push hard for a rapid turnaround when the weather window is closing, or charge gently to protect an expensive pack near the end of its life. That range makes one smart battery charger cover everything from a quick top-up to an overnight conditioning charge — always within the pack’s safe C-limit.
True 14S LiPo/LiHV Support (22.2–62.3V)
The EC2000-14S is a genuine 14S LiPo charger and a native LiHV battery charger in one. Because LiHV (high-voltage lithium polymer) cells charge to 4.35 V each versus 4.20 V for standard LiPo, a charger must understand the difference. This LiPo LiHV battery charger handles both chemistries intelligently, so a mixed inventory of lithium polymer battery packs is no longer a logistics headache.
Why Cell Count and Chemistry Decide Your Charger
A drone battery charger is only as good as its fit to the pack. Agriculture and heavy-lift UAVs run high cell counts — commonly 12S and 14S — at voltages small hobby chargers cannot reach. Cell count drives voltage, and voltage drives everything: at 14S a full LiHV pack sits at 62.3 V, exactly where this lithium battery charger sets its ceiling and balance logic.
>91% Efficiency and Wide AC Input
Greater-than-91% efficiency means less waste heat, cooler operation, and more energy into every pack on the same generator. The wide AC input (100–240 V, 50–60 Hz) runs on field generators, depots or grid power anywhere on site — ideal for a UAV battery charging station deployed across rural India.
Key Features
The EC2000-14S earns its place as a professional battery charger through features that matter in the field, not just on a spec sheet.
- 2000W fast charge — high-capacity packs back to field-ready in minutes.
- 5–30A adjustable current — full control for fast turnaround or gentle care.
- True 14S LiPo/LiHV — native dual-chemistry charging from 22.2 V to 62.3 V.
- Dual-channel design — higher throughput across a battery fleet.
- Charge / Storage / Hub modes — a battery balance charger that manages the whole lifecycle.
- 3.2″ colour LCD — live voltage, current, cell balance and mode at a glance.
- >91% efficiency — cooler, longer, cheaper field sessions.
- Over-voltage & reverse-polarity protection — forgiving of field mistakes.
- AS150U-M industrial connector — secure, low-resistance link at 30 A.
- BIS-approved, Made in India — local stock, fast support, dependable supply.
As an intelligent battery charger and programmable battery charger, it adapts to the pack instead of forcing the pack to adapt to it — the core difference between a smart charger and a dumb power supply.
Smart Charging Modes & Safety
A drone battery does not only need charging; it needs managing.
Charge · Storage · Hub Modes
Charge mode brings a pack to full for immediate use. Storage mode parks cells at roughly 3.8 V each — the healthiest state between missions and through the agricultural off-season, slowing the calendar ageing that quietly kills packs. Hub mode supports efficient multi-pack workflows for crews cycling several batteries through a single station.
Balance Charging & Cell Protection
Balance charging is the single most important thing protecting your investment. By equalising cells on every cycle, this battery balance charger extends pack life and keeps performance predictable across a fleet — essential for any lithium polymer battery charger running multi-cell packs.
Over-Voltage & Reverse-Polarity Protection
Over-voltage protection guards against pushing a cell past its safe ceiling, and reverse-polarity protection forgives the connector mistake that happens at 5 a.m. in a dusty field. Together they make the EC2000-14S a battery management charger you can trust around staff who are pilots first.
Who It's For — Drones, UAVs, Industrial & Robotics
The reason operators standardise on the EC2000-14S is consolidation: one charger for the whole fleet.
Agriculture & Spraying Drones
As an agriculture drone battery charger, it keeps spray runs moving — swap, charge, relaunch. The right battery charger for agricultural UAVs keeps pace with the field, not the other way around, making it a dependable agriculture drone charging solution for precision spraying.
Industrial & Survey UAVs
An industrial UAV battery charger ready for mapping, inspection and survey fleets flying back-to-back, where consistent turnaround is the whole business model.
Heavy-Payload & Logistics Platforms
Headroom for the largest packs on heavy-lift, logistics and delivery platforms — charged at full power rather than throttled back. A true heavy duty drone battery charger.
Robotics, AGV & RC Applications
Beyond aviation, it serves as a robotics battery charger for autonomous ground vehicles and AGVs, and as an RC battery charger for large radio-controlled craft running lithium polymer packs.
Key Benefits
- Less downtime — 2000W fast charge keeps more drones in the air.
- Longer pack life — balance + storage modes protect your battery investment.
- One charger, every platform — mixed LiPo/LiHV up to 14S, no shelf of chargers.
- Lower running cost — >91% efficiency means less wasted power and heat.
- Field-proven reliability — generator-tolerant, rugged, built for dust and long shifts.
- Safer operation — chemistry-aware logic plus OVP and reverse-polarity protection.
- Backed in India — BIS-approved, Made in India, local service and dealer network.
For Indian drone operators, UAV companies and battery distributors, the most underrated benefit is support. Buying a drone battery charger in India from Bharat Skytech means the supply chain, documentation and after-sales team are all reachable — reliability that matters far more to a working fleet than a marginal spec difference.
Evercell EC2000-14S vs Standard Hobby Charger
| Feature | Evercell EC2000-14S | Standard Hobby Charger |
|---|---|---|
| Max cell count | 14S | Typically 6S |
| Chemistry | LiPo + LiHV (native) | LiPo, sometimes LiHV |
| Max power | 2000 W | 100–1000 W |
| Current | 5–30 A adjustable | 1–20 A |
| Channels | Dual | Single (usually) |
| Voltage ceiling | 62.3 V | ~25 V |
| Built for | Agriculture / industrial fleets | Hobby / single packs |
| Field tolerance | Generator-rated, rugged | Bench-oriented |
| Connector | AS150U-M (industrial) | XT60 / XT90 |
| Local support | BIS, Made in India | Often imported |
The takeaway: a standard charger is built for a single hobby pack on a clean bench. The EC2000-14S is a professional drone battery charger built for a fleet in a field — the right tool when your day depends on turnaround.
How to Choose the Right Drone Battery Charger
If you are comparing options, the decision comes down to four questions — and the EC2000-14S answers all four with a yes. Does it match your cell count (up to 14S)? Does it support your chemistry, including LiHV? Can it charge fast enough to keep your fleet flying, with the control to charge gently? Will it survive your environment and is it supported where you operate? A charger that misses any one of these will quietly cost you money or safety. This smart charger for drone batteries is built to miss none of them.
A safety word: LiPo and LiHV chemistry is energy-dense and unforgiving. Always charge within manufacturer limits, on a non-flammable surface, attended, with balance leads connected, and use storage mode for any pack that will sit unused. Treated with respect, a well-built intelligent charger for drone batteries is the best protection your investment can have.
Order the Evercell EC2000 Drone Battery Charger
The Evercell EC2000-14S is built to be the charger an agriculture or industrial drone operation can standardise on and stop thinking about — fast when you need speed, gentle when you need care, smart about chemistry and cell count, hard enough for the field, and supported at home in India. If you run LiPo or LiHV packs up to 14S and your day depends on turnaround, this is the drone battery charger built for the way you actually work.
Request a bulk quote today.
Frequently Asked Questions
Are LiPo and LiHV the same?
No. LiHV (high-voltage LiPo) charges to 4.35 V per cell versus 4.20 V for standard LiPo, giving slightly more capacity. They share construction but need a charger that knows the difference — like the EC2000-14S, which supports both natively.
Can I charge a LiHV battery with a LiPo charger?
Only if the charger has an explicit LiHV mode. A LiPo-only charger will undercharge a LiHV pack and cost you flight time. This LiPo LiHV battery charger handles both correctly.
What charger is best for drone batteries?
One matched to your pack’s chemistry, cell count and capacity, with adjustable high current and balance charging. For agriculture and heavy-lift drones, the best drone battery charger is one rated for 14S LiPo/LiHV at high power — the EC2000-14S covers 6–14S at up to 30 A / 2000 W.
Can I use any charger for a drone battery?
No. Drone packs need a chemistry-aware battery balance charger rated for the correct cell count and voltage. The wrong charger risks cell damage, reduced life, or fire.
How long does it take to charge a drone battery?
Roughly capacity divided by charge current. A 30 Ah 14S pack at 30 A reaches about 80–90% in roughly an hour. Higher current shortens time within the pack’s rated C-limit.
Is a balance charger necessary for LiPo batteries?
Yes. Balance charging equalises cells so they reach full charge together, extending pack life and preventing the imbalance that causes capacity loss and safety risks.
What is an agriculture drone battery charger?
A high-power charger built for the large LiPo/LiHV packs spraying and heavy-lift drones use, designed for fast field turnaround and fleet workflows — exactly the role the EC2000-14S fills as an agriculture drone charging solution.
What is the price of the Evercell LiPo LiHV battery charger?
Evercell LiPo LiHV battery charger is priced at _____ Request a bulk quote from Bharat Skytech for current drone battery charger price in India, with special pricing and free shipping on qualifying bulk orders.
Original price was: ₹32,999.00.₹23,999.00Current price is: ₹23,999.00. (Exclusive of GST)
