Hobbywing X11 Plus Motor with 4314 Propellers Combo for Agriculture Drones
Low voltage, high power
X11PLUS 11118-85KV
carbon-plastic propellers 4314 ,recommend take-offweight 15-18kg/rotor.
This product is designed for agricultural drones. For industrial and manned drone applications, please purchase our dedicated propulsion systems.
CAN + PWN
PWM analog signal + CAN digital signal , precise throttle control, more stable flight. Even in the state of single GPS without RTK, "fixed" flight. *The data was tested at sea level
Fault storage
Built-in fault storage function. Use the DATALINK data
box to download and view, and convert the fault into
data, which helps the UAV to quickly locate
problems and analyze faults.
Multiple Intelligent Protection V2.0
In response to overcurrent, stalled and other working conditions,
the fault processing time is shortened to within 270ms, and
various emergencies can be handled instantaneously to ensure
flight safety.
IPX6 Protection
The ESC is fully sealed and protected, further improving
anti-corrosion and anti-rust level of the motor
Good heat dissipation
The heat dissipation structure of the motor has been upgraded to bring more powerful active heat dissipation. Under the same working conditions, the heat dissipation effect is better than that of X11-18S.
Multiple protection function
The X11-Plus power system is equipped with several protection functions such as:Power-on self-test, Power-on voltage abnormal protection, Current protectionand Stall protection. It is able to output an operating status data to the flight controller in real time.
Note: Using the Hobbywing DataLink data acquisitionmemory can simultaneously collect the real-time operation dataof the 8-channel power system, and pass it to theflight controller through the bus interface toform a closed-loop control system.
Communication & Upgrade
The ESC uses CAN communication by default (with a serial port option available) to enable real-time data transmission of the power system’s working status. It continuously monitors the ESC’s condition, ensuring safer and more reliable flight performance.
Firmware upgrades can be done easily using the Hobbywing DATALINK data box, which allows you to update the ESC online. Additionally, the ESC supports remote firmware upgrades through the flight controller, helping you stay up to date with Hobbywing’s latest features and improvements.
Hobbywing’s CAN protocol has already been successfully integrated with some flight controllers. For closed-source flight controllers, it’s recommended to contact the manufacturer for setup instructions.
About the Product:
The Hobbywing XRotor X11 Plus is a powerful and efficient propulsion system tailored for agriculture UAVs operating under low-voltage and high-power conditions. With enhanced motor cooling, improved thrust output, and built-in fault storage, this system ensures stable, safe, and extended flight times even under challenging environmental conditions.
Key Features:
High Thrust Output: Up to 37kg/rotor at sea level using 43×14” carbon-plastic propellers
Low Voltage Compatibility: Optimized for 12S–14S LiPo batteries
Precise Throttle Control: Supports both PWM analog and CAN digital signals
Multiple Intelligent Protections V2.0: Includes overcurrent, stall, and abnormal power-on voltage protections
Built-in Fault Storage: Works with Hobbywing DataLink for fault diagnostics
IPX6 Ingress Protection: Fully sealed ESC with anti-corrosion and waterproofing
Improved Heat Dissipation: Upgraded motor structure for efficient temperature management
Firmware Upgrade Support: Update ESC via DataLink box or flight controller
Real-Time Data Sync: Communicates real-time status to the flight controller via CAN protocol
Ready for Ardupilot CAN Integration
Technical Specifications:
General:
Product Name: XRotor X11 Plus 11118-85KV
Recommended Take-off Weight: 15–18kg/rotor (at 54V, sea level)
Max Thrust: 37kg/rotor (at 54V, sea level)
System Weight: 2490g
IP Rating: IPX6
Operating Temp: 0–50℃
Recommended Battery: 12S–14S LiPo
Motor:
KV Rating: 85 rpm/V
Stator Size: 111×18mm
Bearing: High-precision Japanese bearings
Powertrain Arm Compatibility: 50mm outer diameter
ESC:
Max Input Voltage: 61V
Max Input Current: 150A (with good cooling)
PWM Input: 3.3V/5V
Signal Frequency: 50–500Hz
BEC: Not included
Operating Pulse Width: 1050–1950μs (fixed)
Propeller:
Material: Carbon-plastic composite
Size: 43×14 inches
Performance Data (Sample at 54V / Sea Level):
| Throttle % | Thrust (g) | Current (A) | Power Input (W) | Efficiency (g/W) |
|---|---|---|---|---|
| 33% | 7175 | 11.3 | 614.7 | 11.7 |
| 51% | 15300 | 35.2 | 1907.5 | 8.0 |
| 75% | 27825 | 88.5 | 4790.5 | 5.8 |
| 100% | 37670 | 146.1 | 7895.3 | 4.8 |
** All test data collected at 25℃, sea level, using 43×14” propeller.
Applications:
Large agricultural drones
Crop spraying UAVs
Low-voltage high-power drone setups
** Note: Not intended for manned or industrial drones. For such applications, please choose Hobbywing’s dedicated industrial propulsion systems.
Why Choose This Product?
Trusted Hobbywing engineering with robust quality assurance
Compatible with Ardupilot DroneCAN protocol
Industry-leading thrust-to-efficiency ratio
Enhanced diagnostic and protection features for safe UAV operations
Package Includes:
1x X11 Plus 11118-85KV Motor
1x Integrated ESC
1x Carbon-Plastic Propeller (43×14 inch)
User Manual & Mounting Hardware
Bulk Orders & Support:
Need large quantities or business support? Contact us directly at:
📞 +91 9713131329
📧 info@bharatskytech.com
Warranty & After-Sales Support:
1-Year Warranty by Bharat Skytech
Covers manufacturing defects, ESC or motor failure under normal use.
After-Sales Support
We provide dedicated post-purchase assistance, including:
Technical troubleshooting
Setup guidance
Firmware updates
Fault analysis via Hobbywing DataLink
Support Helpline: +91 9713131329
Email: info@bharatskytech.com
