Evercell EC2000-14S Drone Battery Charger
The Evercell EC2000-14S is a dual-channel 6–14S LiPo/LiHV drone battery charger for industrial and agriculture drones. BIS-approved, it offers adjustable 5–30 A charging, a 3.2″ colour LCD, and Charge / Storage / Hub modes — reliable, safe and easy to operate in the field.
Engineered for heavy-duty drone operations
Every figure on the EC2000-14S exists to keep birds in the air — a fast drone charger built around fleet uptime, not bench testing. As an intelligent, programmable charger it adapts to the pack instead of forcing the pack to adapt to it.
Features that matter in the field
Fast charge
High-capacity packs back to field-ready in minutes, so spray runs and sorties never wait on the charger.
Adjustable current
Push hard for a rapid turnaround, or charge gently to protect an expensive pack — within the pack's safe C-limit.
LiPo / LiHV
Native dual-chemistry charging from 22.2 V to 62.3 V — the cell counts heavy-lift platforms actually run.
Efficient + wide AC
Less waste heat, cooler operation, and a wide 100–240 V input that runs on field generators or grid power.
>91% efficiency, cooler operation
Greater-than-91% efficiency means less waste heat, cooler operation, and more energy into every pack on the same generator — longer, cheaper field sessions.
Charge · Storage · Hub modes
Hub mode supports efficient multi-pack workflows for crews cycling several batteries through a single station — higher throughput across a battery fleet thanks to the dual-channel design.
LiPo & LiHV supported
The EC2000-14S is a genuine 14S LiPo battery charger and a native LiHV battery charger in one. Because LiHV cells charge to 4.35 V each versus 4.20 V for standard LiPo, a charger must understand the difference. This LiPo/LiHV charger handles both chemistries intelligently, so a mixed inventory of lithium-polymer packs is no longer a logistics headache.
Cell count drives voltage, and voltage drives everything: at 14S a full LiHV pack sits at 62.3 V, exactly where this charger sets its ceiling and balance logic.
Built for the field, not the bench
Designed for dust, generators and long shifts. Greater-than-91% efficiency keeps the unit cooler under load, and the wide AC input tolerates field generators — a charger that holds stable performance through back-to-back sorties.
The AS150U-M industrial connector gives a secure, low-resistance link at 30 A, even after a long day in the dirt.
Three working modes
A drone battery doesn't only need charging — it needs managing.
Charge
Brings a pack to full for immediate use — fast when the weather window is closing.
Storage
Parks cells at roughly 3.8 V each — the healthiest state between missions and through the off-season, slowing calendar ageing.
Hub
Supports efficient multi-pack workflows for crews cycling several batteries through a single station.
Balance charging equalises cells on every cycle — the single most important thing protecting your investment, extending pack life and keeping performance predictable across a fleet.
One charger, every drone mission
From spray fleets at dawn to industrial survey drones flying back-to-back — the field-ready charging solution India's operators rely on.
Maximised safety protection
Over-voltage protection guards against pushing a cell past its safe ceiling, and reverse-polarity protection forgives the connector mistake that happens at 5 a.m. in a dusty field. Together they make the EC2000-14S a battery-management charger you can trust around staff who are pilots first.
Built for the whole fleet
The reason operators standardise on the EC2000-14S is consolidation — one charger for every platform.
Agriculture & spraying
Keeps spray runs moving — swap, charge, relaunch. A dependable agriculture drone charging solution for precision spraying.
Industrial & survey UAVs
Ready for mapping, inspection and survey fleets flying back-to-back, where consistent turnaround is the whole business model.
Heavy-payload & logistics
Headroom for the largest packs on heavy-lift, logistics and delivery platforms — charged at full power, not throttled back.
Robotics, AGV & RC
Beyond aviation — a robotics battery charger for AGVs and an RC charger for large craft running lithium-polymer packs.
EC2000-14S vs a standard hobby charger
| Feature | Evercell EC2000-14S | Standard Hobby Charger |
|---|---|---|
| Max cell count | 14S | Typically 6S |
| Chemistry | LiPo + LiHV (native) | LiPo, sometimes LiHV |
| Max power | 2000 W | 100–1000 W |
| Current | 5–30 A adjustable | 1–20 A |
| Channels | Dual | Single (usually) |
| Voltage ceiling | 62.3 V | ~25 V |
| Built for | Agriculture / industrial fleets | Hobby / single packs |
| Field tolerance | Generator-rated, rugged | Bench-oriented |
| Connector | AS150U-M (industrial) | XT60 / XT90 |
| Local support | BIS, Make in India | Often imported |
A standard charger is built for a single hobby pack on a clean bench. The EC2000-14S is built for a fleet in a field — the right tool when your day depends on turnaround.
Four questions — answered yes
Cell count
Does it match your cell count — up to 14S? Yes.
Chemistry
Does it support your chemistry, including LiHV? Yes.
Speed & control
Fast enough to keep your fleet flying, with control to charge gently? Yes.
Environment
Will it survive your environment and is it supported where you operate? Yes.
A safety word: LiPo and LiHV chemistry is energy-dense and unforgiving. Always charge within manufacturer limits, on a non-flammable surface, attended, with balance leads connected, and use storage mode for any pack that will sit unused.
EC2000-14S full specifications
Datasheet — LiPo / LiHV · Up to 14S · 2000 W
Product Information
Input
Output
Protection
Mechanical
Application
Why operators choose us
Less downtime
High-output, adjustable charging keeps more drones in the air and fewer waiting on the ground.
Field-proven
Designed for dust, generators and long shifts — a charger built for the field, not the lab bench.
Backed in India
Local stock, support and a growing dealer network make this a dependable charging solution India can service fast.
Introduction
Drone Battery Charger — Evercell EC2000-14S | 14S LiPo/LiHV, 2000W
The Evercell EC2000-14S drone battery charger is a dual-channel LiPo/LiHV intelligent charger built for the way Indian agriculture drone and heavy-lift drone fleets actually work. With 2000 W of adjustable output, 6–14S support across 22.2–62.3 V, and 5–30 A of fully controllable current, it brings high-capacity packs back to field-ready in minutes — not hours. BIS-approved and Make in India by Bharat Skytech, it is the professional drone battery charger operators standardise on when uptime is revenue.
Request a bulk quote for current drone battery charger price in India.
Built for Agriculture & Heavy-Lift Drone Operations
When a spray fleet is mid-route at sunrise, the charger is the quiet bottleneck that decides whether the next sortie launches on time. The EC2000-14S was engineered around that single truth. As an agriculture drone battery charger, it lets crews swap, charge and relaunch without stalling the route. As an industrial drone battery charger and UAV battery charger, it keeps mapping, inspection and survey fleets flying sortie after sortie. This is a drone battery charging solution designed for fleet uptime, not bench testing — a true drone battery management charger for serious operations.
2000W Fast Charging for Field Turnaround
Raw output turns a charger from a bench tool into a field asset. As a fast-charging drone battery charger, the EC2000-14S drone battery charger delivers up to 2000 W, enough to push high-capacity agriculture packs back to flight readiness quickly so spray runs and sorties never wait on the charger.
5–30A Adjustable Current Control
Current adjusts from 5 A to 30 A. Push hard for a rapid turnaround when the weather window is closing, or charge gently to protect an expensive pack near the end of its life. That range makes one smart battery charger cover everything from a quick top-up to an overnight conditioning charge — always within the pack’s safe C-limit.
True 14S LiPo/LiHV Support (22.2–62.3V)
The EC2000-14S is a genuine 14S LiPo battery charger and a native LiHV battery charger in one. Because LiHV (high-voltage lithium polymer) cells charge to 4.35 V each versus 4.20 V for standard LiPo, a charger must understand the difference. This LiPo LiHV battery charger handles both chemistries intelligently, so a mixed inventory of lithium polymer battery packs is no longer a logistics headache.
Why Cell Count and Chemistry Decide Your Charger
An agriculture drone battery charger is only as good as its fit to the pack. Agriculture and heavy-lift UAVs run high cell counts — commonly 12S and 14S — at voltages small hobby chargers cannot reach. Cell count drives voltage, and voltage drives everything: at 14S a full LiHV pack sits at 62.3 V, exactly where this lithium battery charger sets its ceiling and balance logic.
>91% Efficiency and Wide AC Input
Greater-than-91% efficiency means less waste heat, cooler operation, and more energy into every pack on the same generator. The wide AC input (100–240 V, 50–60 Hz) runs on field generators, depots or grid power anywhere on site — ideal for a UAV battery charging station deployed across rural India.
Key Features
The EC2000-14S drone battery charger earns its place as a professional battery charger through features that matter in the field, not just on a spec sheet.
- 2000W fast charging — a true fast drone battery charger that returns large agriculture packs to flight readiness quickly.
- 5–30A adjustable current — push hard for rapid turnaround, or charge gently to protect an expensive pack, always within the pack’s safe C-limit.
- Native 6S to 14S LiPo/LiHV — one charger for the cell counts heavy-lift platforms actually run, from 22.2V to 62.3V.
- Dual-channel design — charge two high-capacity batteries independently, ideal as a dual charger for drone battery fleets on busy spraying days.
- Charge / Storage / Hub modes — a full intelligent drone charger that also conditions and parks packs.
- 3.2″ colour LCD — live voltage, current, cell balance and mode at a glance.
- >91% efficiency — less waste heat, cooler running, cheaper field sessions.
- Over-voltage & reverse-polarity protection — forgiving of the mistakes that happen at 5 a.m. in a dusty field.
- AS150U-M industrial connector — a secure, low-resistance link at 30A.
- BIS-approved, Make in India — local stock, fast support, dependable supply.
As an intelligent battery charger and programmable battery charger, it adapts to the pack instead of forcing the pack to adapt to it — the core difference between a smart charger and a dumb power supply.
Benefits of Evercell EC2000-14S - Drone Battery Charger
The EC2000-14S drone battery charger earns its place through outcomes, not just a spec sheet. Less downtime, because 2000W fast charging keeps more drones in the air. Longer pack life, because balance and storage modes protect your battery investment. One charger for every platform, so you retire the shelf of mismatched chargers. Lower running cost, because >91% efficiency wastes less power and heat. Field-proven reliability, because it tolerates generators, dust and long shifts. And local support, because buying a drone battery charger in India from Bharat Skytech means the supply chain and after-sales team are reachable.
Compatible Batteries
The EC2000-14S is a genuine 14S LiPo battery charger and a native LiHV battery charger in one. Because LiHV (high-voltage lithium polymer) cells charge to 4.35V each versus 4.20V for standard LiPo, the charger must understand the difference — and this one does, natively. That makes it a true 6S to 14S battery charger for mixed inventories: Evercell 6S, 12S and 14S LiPo packs, LiHV packs up to 62.3V, and the 22000mAh drone battery – 30000mAh capacities that agriculture and heavy-lift UAVs typically run
Applications
- Agriculture & spraying drones — the field-ready spraying drone battery charger that keeps swap-charge-relaunch cycles moving.
- Industrial & survey UAVs — consistent turnaround for mapping, inspection and surveillance fleets.
- Heavy-payload & logistics platforms — headroom for the largest packs, charged at full power, not throttled.
- Robotics, AGV & RC — a capable charger for autonomous ground vehicles and large RC craft on lithium-polymer packs.
How to Choose the Right Drone Battery Charger
If you are comparing options, the decision comes down to four questions — and the EC2000-14S drone battery charger answers all four with a yes. Does it match your cell count (up to 14S)? Does it support your chemistry, including LiHV? Can it charge fast enough to keep your fleet flying, with the control to charge gently? Will it survive your environment and is it supported where you operate? A charger that misses any one of these will quietly cost you money or safety. This smart charger for drone batteries is built to miss none of them.
A safety word: LiPo and LiHV chemistry is energy-dense and unforgiving. Always charge within manufacturer limits, on a non-flammable surface, attended, with balance leads connected, and use storage mode for any pack that will sit unused. Treated with respect, a well-built intelligent charger for drone batteries is the best protection your investment can have.
Why Choose This Charger
If you are comparing options, the decision comes down to four questions, and the EC2000-14S answers all four with a yes. Does it match your cell count up to 14S? Does it support your chemistry, including LiHV? Can it charge fast enough to keep your fleet flying, with the control to charge gently? Will it survive your environment and is it supported where you operate? The best agriculture drone battery charger for professional work must miss none of these — and this one does not.
Why Buy From Bharat Skytech
Bharat Skytech is one of India’s trusted e-commerce stores for agriculture drone components. Buying your drone battery charger online here means BIS-approved, Make in India hardware, transparent pricing, GST invoicing, fast pan-India shipping, bulk-order pricing, and a responsive after-sales team. For UAV companies, dealers and battery distributors, that supply-chain reliability matters more to a working fleet than a marginal spec difference on paper.
Maintenance Tips
Keep the charger in a dry, ventilated spot and clear the vents of field dust so cooling stays efficient. Inspect the AS150U-M connector and leads for wear before each shift. Always connect balance leads. Use Storage mode for any pack that will sit unused — parking cells near 3.8V slows calendar ageing. Charge on a non-flammable surface, attended, and within the pack’s rated C-limit.
Safety Features
LiPo and LiHV chemistry is energy-dense and unforgiving, so the EC2000-14S builds in over-voltage protection against pushing a cell past its ceiling and reverse-polarity protection for connector mistakes. Balance charging equalises cells on every cycle — the single most important thing protecting your investment. Together with BIS approval, these make it a battery management charger you can trust around staff who are pilots first.
Warranty & Package Contents
Supplied with the EC2000-14S charger unit, AC power input lead, and user documentation. Covered under Bharat Skytech’s standard warranty and after-sales support — contact the team for current warranty terms and bulk-order coverage.
Conclusion
If you run LiPo or LiHV packs up to 14S and your day depends on turnaround, the Evercell EC2000-14S is the agriculture drone battery charger built for the way you actually work — fast when you need speed, gentle when you need care, smart about chemistry and cell count, rugged enough for the field, and supported at home in India. Request a bulk quote today for current drone battery charger price and volume pricing.
Frequently Asked Questions
Are LiPo and LiHV the same?
No. LiHV (high-voltage LiPo) charges to 4.35 V per cell versus 4.20 V for standard LiPo, giving slightly more capacity. They share construction but need a charger that knows the difference — like the EC2000-14S, which supports both natively.
Can I charge a LiHV battery with a LiPo charger?
Only if the charger has an explicit LiHV mode. A LiPo-only charger will undercharge a LiHV pack and cost you flight time. This LiPo LiHV battery charger handles both correctly.
What charger is best for drone batteries?
One matched to your pack’s chemistry, cell count and capacity, with adjustable high current and balance charging. For agriculture and heavy-lift drones, the best drone battery charger is one rated for 14S LiPo/LiHV at high power — the EC2000-14S covers 6–14S at up to 30 A / 2000 W.
Can I use any charger for a drone battery?
No. Drone packs need a chemistry-aware battery balance charger rated for the correct cell count and voltage. The wrong charger risks cell damage, reduced life, or fire.
How long does it take to charge a drone battery?
Roughly capacity divided by charge current. A 30 Ah 14S pack at 30 A reaches about 80–90% in roughly an hour. Higher current shortens time within the pack’s rated C-limit.
Is a balance charger necessary for LiPo batteries?
Yes. Balance charging equalises cells so they reach full charge together, extending pack life and preventing the imbalance that causes capacity loss and safety risks.
What is an agriculture drone battery charger?
An agriculture drone battery charger is a high-power drone battery charger designed to quickly charge large LiPo/LiHV batteries used in spraying and heavy-lift drones. It helps reduce charging time and supports fast drone battery charging, field operations, and fleet workflows. The EC2000-14S is an ideal agriculture drone charging solution for professional UAV operations.
What is the price of the Evercell LiPo LiHV battery charger?
Evercell LiPo LiHV battery charger is priced at Rs. 48999 + 18% GST Request a bulk quote from Bharat Skytech for the current drone battery charger price in India, with special pricing and free shipping on qualifying bulk orders.
Original price was: ₹52,999.00.₹48,999.00Current price is: ₹48,999.00. (Exclusive of GST)
